Dewalt DW717 Instruction Manual - Page 6

English Crown Molding Fence: DW7084 Used for precision cutting of crown molding. Miter Saw LED Worklight System: DWS7085 Lighting used for greater visibility and cutting alignment during operation. Easy to install. SAW BLADES: ALWAYS USE 10" (254 mm) SAW BLADES WITH 5/8" (15.9 mm) ARBOR HOLES. SPEED RATING MUST BE AT LEAST 5000 RPM. Never use a smaller diameter blade. It will not be guarded properly. Use crosscut blades only! Do not use blades designed for ripping, combination blades or blades with hook angles in excess of 5º. BLADE DESCRIPTIONS APPLICATION DIAMETER TEETH Construction Saw Blades (thin kerf with anti-stick rim) General Purpose 10" (254 mm) 40 Fine Crosscuts 10" (254 mm) 60 NOTE: Thin kerf 60T blades without noise damping may ring under no load conditions. Woodworking Saw Blades (provide smooth, clean cuts) Fine crosscuts 10" (254 mm) 80 Non-ferrous metals 10" (254 mm) 80 NOTE: For cutting non-ferrous metals, use only saw blades designed for this purpose. Unpacking Your Saw Check the contents of your miter saw carton to make sure that you have received all parts. In addition to this instruction manual, the carton should contain: 1. One DW717 miter saw. 2. One DEWALT 10" (254 mm) diameter saw blade. 3. One blade wrench in wrench pocket shown in Figure 9. 4. One DW7053 Dustbag (some models). 5. One material clamp. Specifications CAPACITY OF CUT 51º miter right, 60º miter left 48º bevel left and right 0º miter Max. Height 3.5" (89 mm) Max. Width 12.6" (320 mm) Result Width 11.9" (302 mm) Result Height 3.0" (76 mm) 45º miter Max. Height 3.5" (89 mm) Max. Width 8.9" (226 mm) Result Width 8.4" (213 mm) Result Height 3.0" (76 mm) 45º bevel - Left Max. Height 2.3" (58 mm) Result Width 11.9" (302 mm) Max. Width 12.6" (320 mm) Result Height 2.0" (50 mm) DW7080 END PLATE LOCKNUTS DW7082 5 DW7084 DW7187 DWS7085