Dewalt DWF83PL Instruction Manual - Page 5

English • Always assume that the tool contains fasteners. • Do not point the tool at co-workers or yourself at any time. No horseplay! Work safe! Respect the tool as a working implement. (Fig. J) • Keep bystanders, children, and visitors away while operating a power tool. Distractions FIG. K can cause you to lose control. When tool is not in use, it should be locked in a safe place, out of the reach of children. • Remove finger from trigger when not driving fasteners. Never carry tool with finger on trigger. Accidental discharge could result. • Do not overreach. Maintain proper FIG. L footing and balance at all times. Loss of balance may cause cause personal injury. (Fig. K) • Make sure hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of balance or footing. Do not lift, pull or lower tool by the hose. • Use the tool only for its intended use. Do not discharge fasteners into open FIG. M air, concrete, stone, extremely hard woods, knots or any material too hard for the fastener to penetrate. Do not use the body of the tool or top cap as a hammer. Discharged fasteners may follow unexpected path and cause injury. (Fig. L) • Always keep fingers clear of contact FIG. N trip to prevent injury from inadvertent release of nails. (Fig. M) • Refer to the Maintenance and Repairs sections for detailed information on the proper maintenance of the tool • Always operate the tool in a clean, lighted area. Be sure the work surface is clear of any debris and be careful not to lose footing when working in elevated environments such as rooftops. • Do not actuate tool unless tool is placed firmly against the workpiece. • Do not drive fasteners near edge of material. The workpiece may split causing the fastener to ricochet, injuring FIG. O you or a co-worker. Be aware that the nail may follow the grain of the wood (shiner), causing it to protrude unexpectedly from the side of the work material. Drive the nail perpendicular to the grain to reduce risk of injury. (Fig. N) • Do not drive nails onto the heads FIG. P of other fasteners or with the tool at too steep an angle. Personal injury from strong recoil, jammed fasteners, or ricocheted nails may result. (Fig. O) • Be aware of material thickness when using the nailer. A protruding nail may cause injury. 3