Dewalt DWS716XPS Instruction Manual - Page 3

Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. (Used without word) Indicates a safety related message. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Fig. A DWS716XPS 23 1 13 2 10 17 21 10 18 4 15 12 9 21 3 8 7 22 6 5 English 13 2 15 8 3 4 14 15 9 1 Trigger switch 2 Operating handle 3 Mounting holes 4 Lower guard 5 Miter lock lever 6 Miter detent trigger 7 Miter scale 8 Miter scale screws 14 16 19 3 20 3 11 9 Hand indentations 10 Sliding fence 11 Bevel lock knob 12 Dust port 13 Carrying handle 14 Fence lock knob 15 Clamp mounting hole 16 6 mm hex wrench 17 Head lock pin 18 Base fence 19 45° bevel stop adjustment screw 20 45° bevel stop override levers 21 Vertical material clamp 22 Miter detent override 23 CUTLINE LED On/Off switch (DWS716XPS only) WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: To reduce the risk of injury, read the instruction manual. If you have any questions or comments about this or any DeWALT tool, call us toll free at: 1-800-4-DeWALT (1-800-433-9258). 1