Dewalt DXGNR4000 Instruction Manual - Page 9

Assembly Unpacking • Remove all packaging material. • Remove separate accessory kit box. • Remove generator from carton. Accessories Check contents against the list in Contents. If any parts are missing or damaged, or if any problems occur during assembly, call the Generator Helpline at 1-888-431-6871. Contents Item Qty. Generator 1 Owner's Manual 1 Product Registration Card (English, Spanish, and French) 3 Service and Emissions Warranty 1 SAE 30 Oil 1 Oil Funnel 1 Wheel (A) 2 Frame Foot (B) 2 Handle Assembly (C) 1 Hardware Bag Cotter Pin (D) 2 1/2" Flat Washer (E) 2 M8 Carriage Bolt (F) 2 M8 Bolt (long) (G) 4 M8 Hex Flange Nut (H) 4 1/2" Axle Pin (J) 2 M8 Acorn Nut (K) 2 Spark Plug Wrench 1 Install Wheel Kit The wheels are specially designed to enhance portability. NOTICE: The wheels are not intended for overthe-road use. 1. Slide axle pin (J) through wheel, 1/2" flat washer (E), and wheel bracket on frame. 2. Insert cotter pin (D) and bend tabs to lock in place. G F B C H E D J A 003604 Install Frame Foot and Rubber Bumpers 1. Slide M8 bolt (G) through holes in frame rail. Slide frame foot (B) onto M8 bolts. Install locking flange nuts (H). Install Handle 1. Slide M8 carriage bolt (F) through handle bracket and handle assembly (C) by first inserting the bolt through the square hole in the handle assembly (C). 2. Install M8 acorn nut (K). Install Accessory Kits The generator requires some minor assembly before use. Tools Required Obtain the following tools: • Two 12mm and one 13mm box wrenches Owner's Manual for Portable Generator 7