Dirt Devil SD30070 User Manual - Page 5
Caution, Warning, Notice
View all Dirt Devil SD30070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CAUTION: TO REDUCE THE RISK OF DAMAGE: -n • Avoid picking up hard, sharp objects with this product, as they may cause damage. • Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures. • Do not use sharp objects to clean out hose as they can cause damage. 70 WARNING: To reduce the risk of electric shock, this appliance has a polarized plug C5 (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug 0 does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. NOTICE A THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR CLEANER TO PROTECT IT FROM OVERHEATING. WHEN THE THERMAL PROTECTOR ACTIVATES THE CLEANER WILL STOP RUNNING. If this happens proceed as follows: An auto reset thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates the cleaner suction motor will stop running. If the vacuum stops running proceed as follows: 1. Turn cleaner OFF and unplug it from the electrical outlet. IMPORTANT: If left plugged in and turned on, the cleaner motor may start unexpectedly. 2. Empty dirt cup. Check fullness of bag, change if needed. Empty dirty water tank. 3. Inspect the nozzle inlet, nozzle connector, hose connector, hose, wand, and exhaust filter for any obstructions. Clear obstructions if present. 4. After the motor cools for 30 minutes, the thermal protector will deactivate and cleaning may continue. Plug the cleaner back into the electrical outlet. If the thermal protector continues to activate after following the above steps your cleaner needs servicing. if the thermal protector continues to activate after following the above steps, your cleaner needs servicing.