Dirt Devil UD40230 Revision 2 (5/2006) - Page 5
Hose And Tool Usage, Belt Or Brushroll Removal & Replacement: Continued, Troubleshooting Guide - reviews
View all Dirt Devil UD40230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
BELT OR BRUSHROLL REMOVAL & REPLACEMENT: CONTINUED TO REPLACE BELT OR BRUSHROLL 4. 5. 6. MOTOR SHAFT Slide belt onto motor shaft. 7. END CAP Place new belt in area of brushroll without bristles. 6a. With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end cap on the right side is in the correct orientation (6a inset). Rotate brushroll manually to make sure belt is properly aligned. 8. Reattach nozzle guard by firmly pushing down until it snaps into place. Flip cleaner back over and replace all six (6) screws. HOSE AND TOOL USAGE CAUTION: Do not lift unit from floor to use hose, loose items may become entangled in the rotating brushroll TO USE HOSE AND ATTACHMENTS 1. 2. 3. TROUBLESHOOTING GUIDE WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING PROBLEM Cleaner won't run Cleaner won't pick-up or low suction Dust escaping from cleaner POSSIBLE REASON 1. Power cord not firmly plugged into outlet. 2. Blown fuse or tripped breaker. 3. Needs service. 4. Thermal Protector activated. POSSIBLE SOLUTION 1. Plug unit in firmly. 2. Check fuse or breaker in home. Replace fuse/reset breaker. 3. Take to service center. To find nearest location, visit our website at www.dirtdevil.com or call 1-800-321-1134. 4. Unplug cleaner - allow to cool. 1. Dirt container not installed correctly. 2. Dirt container full. 3. Brushroll worn. 4. Broken or worn belt. 5. Clogged filter. 6. Nozzle/brushroll clogged. 7. Hose clogged. 1. Review dirt container removal & replacement Pg. 7, 8. 2. Empty dirt container - Pg. 7. 3. Replace brushroll - Pg. 8, 9. 4. Replace belt - Pg. 8, 9. 5. Remove filter and clean - Pg. 7, 8. 6. Check nozzle/brushroll; remove obstruction/clog - Pg. 8, 9. 7. Remove hose; remove clog - Pg. 6. 1. Dirt container full. 2. Dirt container not installed correctly. 3. Hose not installed correctly. 4. Filter not installed completely. 1. Empty dirt container - Pg. 7. 2. Review dirt container removal & replacement - Pg. 7, 8. 3. Review hose installation - Pg. 6. 4. Review filter removal & replacement - Pg. 7, 8. ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE CUSTOMER SERVICE (1-800-321-1134) In the event that further assistance is required, see your Yellow Pages for an authorized Royal® Dealer or visit our website at www.dirtdevil.com. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal® Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.) Remove the hose from hose caddy. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the hose end. To remove tool, twist and pull apart gently. 9 10