Dynex DX-42E250A12 User Manual (English) - Page 15

Making connections DX-42E250A12 11 Connecting a DVD or Blu-ray player Using HDMI (best) To connect a DVD or Blu-ray player using HDMI: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not included) to an HDMI jack on the back of your TV and to the HDMI OUT jack on the DVD or Blu-ray player. Using DVI (same as HDMI but requires a sound connection) To connect a DVD or Blu-ray player using DVI: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not included) to one end of an HDMI cable (not included). 3 Connect the HDMI-DVI adapter to the DVI OUT jack on the DVD or Blu-ray player and to the HDMI 1 jack on the back of your TV. Back of TV DVD or Blu-ray player HDMI cable 3 Turn on your TV, then turn on the DVD or Blu-ray player. 4 Press INPUT to open the Source List. 5 Press or to highlight HDMI 1 or HDMI 2, then press OK/ENTER. Note You can also press HDMI repeatedly to select the DVD or Blu-ray player. DVD or Blu-ray player Back of TV HDMI cable with HDMI-DVI adapter AV sound cable 4 Connect an AV audio cable (L/R) to the AV IN L and R jacks on the back of your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player. 5 Turn on your TV. 6 Turn on the DVI device, then set it to the output mode. See the documentation that came with the device for more information. 7 Press INPUT to open the Input Source list. 8 Press or to select HDMI 1 then press OK/ENTER. Note You can also press HDMI repeatedly to select the HDMI 1 or HDMI 2.