Dynex DX-42E250A12 User Manual (English) - Page 8
Installing the stand or, wall-mount bracket - wall mount
View all Dynex DX-42E250A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 DX-42E250A12 Installing the stand or wall-mount bracket Installing the stand or wall-mount bracket Notes If you plan to wall-mount your TV, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Insert the stand column into the base plate, aligning the ridges on the column with the grooves in the base plate. 2 Secure the stand column to the base plate with the six screws (SJ4, 16 mm) provided. Stand column Base plate Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket. To attach your TV to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the base to the stand, then remove the base. 3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. 15.75 in. (400 mm) 3 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 15.75 in. (400 mm) 4 Secure the stand to the screen with the four provided screws. Wall-mount brackets