Dynex DX-CR121 User Guide - Page 15
Troubleshooting
UPC - 600603112942
View all Dynex DX-CR121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Troubleshooting 15 Troubleshooting If memory cards do not appear in My Computer or Windows Explorer, check the following: • Make sure the card reader is fully connected into your card reader. Unplug and reconnect your card reader. • Try a different memory card of the same type in the same slot. If a different memory card works, the original memory card should be replaced. • Disconnect the cable from your card reader and shine a flashlight into the empty card slots. Look to see if any pin inside is bent, and straighten bent pins with the tip of a mechanical pencil. Replace your memory card reader if a pin has bent so much that it touches another pin. • If you can't customize the drive icons after you install the driver in your computer, if you have other card readers connected to your PC, disconnet them and try to install the driver again.