Dynex DX-CR121 User Guide - Page 16
has not exceeded the capacity of the card. - troubleshooting
UPC - 600603112942
View all Dynex DX-CR121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Troubleshooting If memory cards appear in My Computer but errors occur when writing or reading, check the following: • Make sure that the memory card is fully inserted into the slot. • Try a different memory card of the same type in the same slot. If the different memory card works, the original memory card should be replaced. • Some cards have a read/write security switch. Make sure that the security switch is set to Write Enabled. • Make sure that the amount of data you attempted to store has not exceeded the capacity of the card. • Inspect the ends of the memory cards for dirt or material closing a hole. Clean the contacts with a lint-free cloth and small amounts of isopropyl alcohol. • If errors persist, replace the memory card.
16
Troubleshooting
If memory cards appear in My Computer but errors occur when writing or
reading, check the following:
•
Make sure that the memory card is fully inserted into the
slot.
•
Try a different memory card of the same type in the same
slot. If the different memory card works, the original
memory card should be replaced.
•
Some cards have a read/write security switch. Make sure
that the security switch is set to Write Enabled.
•
Make sure that the amount of data you attempted to store
has not exceeded the capacity of the card.
•
Inspect the ends of the memory cards for dirt or material
closing a hole. Clean the contacts with a lint-free cloth and
small amounts of isopropyl alcohol.
•
If errors persist, replace the memory card.