Dynex DX-D9PDVD Quick Setup Guide (English) - Page 2
Setting up your player, Connecting to a TV or monitor, Using your DVD player, Legal notices,
View all Dynex DX-D9PDVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Setting up your player To install your player in a vehicle 1 Loosen the straps of the mounting plate as shown below, fit the DVD player or monitor to the mount in "front" position. 2 Slide the horizontal straps A and B through the slots on the back of the DVD player or monitor, then fold and secure them on to the back of the mounting plate until the Velcro attaches. 3 Bring straps C1, C2, D1, and D2 in front of the DVD player or monitor and attach to the Velcro as shown. 4 Fit the straps E1, E2, F1, and F2 around the headrest and secure the two buckels. Pull the straps tight as shown. A B To connect to a 12V car power outlet 1 Plug one end of the car power adapter into the DC IN jack on the side of your player. 2 Plug the other end of the adapter into a 12V car power outlet or car cigarette lighter socket. 3 Using the AV/DC cable, connect AV OUT and DC OUT on the DVD player to AV IN and DC IN on the extra monitor. 4 Turn on your player. Extra monitor DVD player Power outlet or cigarette lighter socket SETUP FUNC. To connect to AC power • Plug one end of the AC/DC power adapter into the DC IN jack on the side of your player, and the other end into an AC outlet. Connecting to a TV or monitor You can connect your DVD player to a TV or monitor so you can watch DVDs on the TV or monitor. 1 Plug the end of the supplied AV cable that has one black connector into the AV OUT jack on your DVD player. 2 Plug the connectors on an RCA cable (not included) into the connectors on the other end of the supplied AV cable. Make sure that the colors on the connectors match. 3 Plug the other end of the RCA cable into the AV jacks on the TV or monitor. The white connector goes into the left audio jack. The red connector goes into the right audio jack. The yellow connector goes into the video jack. TV or Monitor White = left audio Red = right audio Yellow = video Using your DVD player Playing a DVD or audio CD Note: Most DVDs and your DVD player have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging. 1 Make sure that your player is connected to power. 2 Slide the ON/OFF switch to the ON position. 3 Slide the OPEN switch. The disc tray opens. 4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically. Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. Canada ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Important safety instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Unplug this apparatus during lightning storms or when unused for long periods of time. 13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it. 15 The wall plug is the disconnecting device. The plug must remain readily operable. 90-day limited warranty Visit www.dynexproducts.com for details. Contact Dynex: For customer service, call 800-305-2204 www.dynexproducts.com © 2012 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 12-0606