Dynex DX-EHB4 User Manual (English) - Page 2
Dynex DX-EHB4 Network Hub - settings
UPC - 600603103896
View all Dynex DX-EHB4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
DX-EHB4.fm Page 2 Friday, April 29, 2005 4:14 PM 2 Dynex DX-EHB4 Network Hub Dynex DX-EHB4 Network Hub Français 4 Español 6 10Base-T Ethernet Hub This hub features plug-and-play connections and easy installation. Setting up your hub To set up your network hub: 1 Place your hub in a well-ventilated area. 2 Don't place heavy objects on the hub. 3 Connect the AC power adapter to the hub, then plug the adapter into an AC power outlet. 4 Connect the network cables as shown in the following diagram: Interpreting the LEDs Power-Indicates that the hub has power. Collision-Blinking indicates that data collisions are occurring on the network. Collisions occur when two networked computers send data at the same time. If this LED blinks frequently, it means network traffic is heavy, and you should consider adding a bridge or hub to reduce collisions.