Dynex DX-EHB4 User Manual (English) - Page 3
Troubleshooting, Specifications - 4 port 10 mbps hub
UPC - 600603103896
View all Dynex DX-EHB4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
DX-EHB4.fm Page 3 Friday, April 29, 2005 4:14 PM Dynex DX-EHB4 Network Hub 3 Link/Rx-Indicates when the port has connected to the network (on) or when the port is receiving data (blinking). Each port has one Link/Rx LED. Troubleshooting If the Link/Rx port is connected but the LED is off, make sure that: • Power for both the hub and the connected node is on. • The network cable is not loose. • The network cable is the correct type. • The network cable is not broken. • The network cable's RJ-45 connectors have been wired correctly. • The connected node's network adapter is working. Specifications Data transfer rate 10 Mbps Protocol CSMA/CD Network type 10Base-T Topology Star Power requirement 9VAC Power consumption 5 W maximum Operating temperature 32° to 104°F (0° to 40° C) Humidity tolerance 5%-95% non-condensing CABLE AND CONNECTOR REQUIRED SPECIFICATIONS Cable type 10Base-T UTP Cable characteristics 0.4-0.6 mm (22-26 AWG) 8-wire (only four wires are used for 10Base-T) Maximum segment length 100 m Connectors RJ-45 © 2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.