Dynex DX-PDP42-09 User Manual (English) - Page 12
Hdmi1 In, Hdmi2 In, Hdmi Audio L, Audio R, Input, Hdmi1, Hdmi2, Enter, Pc In Vga, Pc In Audio L, Pc - screen
![]() |
View all Dynex DX-PDP42-09 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Connecting AV equipment with a DVI connector This connection can be used to connect a digital video source, such as a PC, digital-capable DVD, or digital set-top box, to your TV. Back of TV HDMI 1 IN HDMI 2 IN OUTPUT VIDEO DIGITAL-AUDIO S-VIDEO1 IN L Y/C L PC IN VGA L R YPbPr1 IN Y R RL Pb Pr R L R L R Y YPbPr2 IN Pb Pr L R DVI-to-HDMI cable DVI output AV equipment To connect AV equipment with an HDMI-to-DVI cable: 1 Plug the DVI connector of an HDMI-to-DVI cable into the DVI out jack of the AV equipment, then plug the HDMI connector into the HDMI1 IN or HDMI2 IN jacks on the back of your TV. 2 Plug RCA audio cables into the audio output jacks of the AV equipment, then into the HDMI AUDIO L (white) and AUDIO R (red) jacks on the back of your TV. 3 Press to turn on your TV. 4 Press INPUT, press or to select HDMI1 or HDMI2 (rear), then press ENTER to confirm. Note To connect your TV to the AV equipment's DVI output, you need an HDMI-to-DVI cable or an HDMI adapter (not supplied) and audio cables. Setting up your TV Connecting a PC For information on connecting a PC to your TV with a DVI cable, see "Connecting AV equipment with a DVI connector" on Page 12. Back of TV HDMI 1 IN HDMI 2 IN OUTPUT VIDEO DIGITAL-AUDIO S-VIDEO1 IN L Y/C L PC IN VGA L R YPbPr1 IN Y R RL Pb Pr R L R L R Y YPbPr2 IN Pb Pr L R Audio cable VGA cable PC To connect a PC: 1 Plug a VGA (D-sub 15-pin) cable into the VGA (RGB) output jack on your PC, then into the PC IN VGA jack on the back of your TV. 2 Plug an audio cable into the audio output jack on your PC, then into the PC IN AUDIO L (white) and AUDIO R (red) jacks on the back of your TV. 3 Turn on your TV and the PC. 4 Press INPUT, press or to select PC (VGA), then press ENTER to confirm. Notes In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the VIDEO menu until the picture is clear. Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen. Depending on your graphics card, some resolution settings may not allow the image to be positioned on the screen correctly. The screen resolution of your TV is optimized during for the display modes listed below. If the signal from the PC is a standard resolution, the screen is adjusted automatically. If the signal from the system is not standard, adjust the screen resolution by referring to your video card user guide, otherwise there may be no picture. Resolution 640 × 400 720 × 400 640 × 480 800 × 600 1024 × 768 Vertical frequency (Hz) 85 85 60 72 75 85 56 60 72 75 85 60 70 75 Horizontal frequency (kHz) 37.9 37.9 31.5 37.9 37.5 43.3 35.1 37.9 48.1 46.9 53.7 48.4 56.5 60.0
![](/manual_guide/products/dynex-dxpdp4209-user-manual-english-4e86c12/12.png)