Dynex DX-PDVD7 User Manual (English) - Page 22
Troubleshooting - region code
UPC - 600603110474
View all Dynex DX-PDVD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 Troubleshooting Cannot advance through a movie's opening credits and warning information • The disc is programmed to prohibit that action. The hand icon ( ) appears on the screen • The selected feature or action cannot be completed at this time because: • The disc software restricts it. • The disc software does not support the feature (such as angles). • The feature is temporarily unavailable. • You have requested a title or chapter that is out of range. No forward or reverse scan • Some discs have sections that prohibit rapid scanning or title and chapter skip. • You cannot advance through the opening credits and warning information at the beginning of movies because the disc is programmed to prohibit that action. Bad sound quality • Make sure that the audio output mode is set correctly. • Make sure that the audio connection between the player and amplifier is correct. Disc cannot be played • Make sure that a disc is in the player. • Make sure that the disc is placed on the disc tray correctly, with the label side up. • Make sure you are using the correct type of disc (digital video discs, audio CDs, or MP3s). • Both the player and disc are coded by region. If the region codes do not match, the disc cannot be played. This player is coded for Region 1 discs. Remote control does not work • Remove obstructions between the remote control and the player. • Point the remote control at the remote control sensor of the player. • Replace the batteries with new ones. Disc play starts, then stops immediately • Both the player and disc are coded by region. If the region codes do not match, the disc cannot be played. This player is coded for Region 1 discs. • The disc is dirty. Clean it. • Condensation has formed in the player. Let the player dry out, then try again. Picture is distorted • Inspect the disc because it might be damaged. Try another disc. • It is normal for some distortion to appear during forward or reverse scan. No power • If running on AC power: • Make sure that the plug is correctly inserted in the power outlet. • Make sure that the AC power adapter is inserted to the correct jack or connector on the DVD player. • Make sure that the power outlet has power (some power outlets are controlled by a switch).