E-Z-GO Express L4 - Electric Owner Manual - Page 58
Light Bulb Replacement, Fuse Replacement
View all E-Z-GO Express L4 - Electric manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
MAINTENANCE Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. LIGHT BULB REPLACEMENT To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or paper towel to handle the glass portion of the bulb. For vehicles equipped with lights mounted in the cowl, locate bulb socket on backside of light and turn bulb socket a quarter turn counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn clockwise to secure. Similarly replace the turn signal light bulb, locate bulb socket on backside of light bar and turn bulb socket a quarter turn 5 counterclockwise to unlock and pull out bulb and socket. Insert new bulb and rotate socket a quarter turn clockwise to secure.. Inside of Cowl Headlight Casing Screw Rear Fender Tail Light Lens Headlight Bulb Tail Light Bulb To replace the tail and brake light bulb, remove hardware securing lens and remove lens. Install replacement bulb. FUSE REPLACEMENT To replace fuses, locate the fuse block under the driver side seat. Pull out old fuse and replace with a new automotive type fuse. Headlight and taillight bulbs and fuses are available from a local Distributor, an authorized Branch or the Service Parts Department. 5- 8