E-Z-GO Express L6 - Gas Owner Manual - Page 66
Lubrication, Spark Plugs, Tool List
View all E-Z-GO Express L6 - Gas manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
MAINTENANCE Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. LUBRICATION Do not use more than three (3) pumps of grease in any grease fitting at any one time. Excess grease may cause grease seals to fail or grease migration into areas that could damage components. Putting more than three pumps of grease in a grease fitting could damage grease seals and cause premature bearing failure. 5 SPARK PLUGS Tool List Qty. Spark plug socket, 13/16", 1/2" drive...1 Ratchet, 1/2" drive ...1 Plug gauge, wire type ...1 Anti-seize compound ...AR Torque wrench, 1/2" drive, ft. lbs...1 Use care not to over-tighten the plug. Over-tightening can cause damage to the aluminum cylinder head threads. Remove and inspect the spark plug at intervals indicated in the Periodic Service Schedule. Spark plug should be properly gapped. Tighten to 16 ft. lbs. (22 Nm) torque Remove and inspect the spark plug at intervals indicated in the Periodic Service Schedule. Spark plug should be properly gapped. Tighten to 16 ft. lbs. (22 Nm) torque. Fouled spark plug is indicated by a wet, black appearance. This could be caused by a dirty air filter element or other restrictions in the air intake system. Incorrectly adjusted valves, spark plug wire which are in poor condition or poor quality fuel could also contribute to the problem Spark Plug .030" (.75 mm) Gap 5 - 22