E-Z-GO Express S4 - Electric Owner Manual - Page 57
Wheel Installation, Unidirectional Tires
View all E-Z-GO Express S4 - Electric manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
MAINTENANCE Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. Wheel Installation To reduce the possibility of component damage, do not tighten lug nuts to more than 85 ft. lbs. (115 Nm) torque. NOTICE It is important to follow the 'cross sequence' pattern when installing lug nuts. This will assure even seating of the wheel against the hub. With the valve stem to the outside, mount the wheel onto the hub with lug nuts. Finger tighten the lug nuts (1) in a 'cross sequence' pattern. Tighten the lug nuts to 50 to 85 ft. lbs. (68 to 115 Nm) torque in 20 ft. lbs. (27 Nm) increments following the 'cross sequence' pattern. Unidirectional Tires Some vehicles may be fitted with unidirectional tires. These tires may be identified by a directional arrow on the sidewall. Be sure to position the wheel on hub correctly with arrow indicating direction of rotation when moving forward. 'Cross Sequence' Rota 1 3 tion Front of Vehicle 4 2 Tire style may vary Valve Stem Cap Tire style may vary 5 Cross Sequence 5- 7