EMC DS-5100B Hardware Reference - Page 47
Laser compliance, RTC battery, Electrical safety, Regulatory certifications, ATTENTION, TABLE 12
View all EMC DS-5100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Regulatory compliance A Laser compliance This equipment contains Class 1 laser products and complies with FDA Radiation Performance Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2. ATTENTION Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with IEC 825-2. Optical products that do not comply with these standards might emit light that is hazardous to the eyes. RTC battery ATTENTION Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the battery is incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock begins to lose time. Electrical safety ATTENTION This switch might have more than one power cord. To reduce the risk of electric shock, disconnect both power cords before servicing. ATTENTION Connect the power cord only to a grounded outlet. ATTENTION This product is designed for an IT power system with phase-to-phase voltage of 230V. After operation of the protective device, the equipment is still under voltage if it is connected to an IT power system. Regulatory certifications Table 12 lists the EMC compatibility for the Brocade 5100. TABLE 12 EMC (electromagnetic compatibility) Country Safety EMC United States Canada Bi_Nat UL/CSA 60950-1 1st Ed or ANSI C63.4 latest Bi_Nat UL/CSA 60950-1 1st Ed or ICES-003 Class A latest Japan European Community EN60950-1 or latest CISPR22 and JEIDA (Harmonics) EN55022 and EN55024 Brocade 5100 Hardware Reference Manual 35 53-1000854-02