EVGA GeForce GTX 580 FTW Hydro Copper 2 Installation Guide - Page 2
highlighted
View all EVGA GeForce GTX 580 FTW Hydro Copper 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
The following instructions and pictures are provided to assist in mounting the EVGA Hydro Copper 2 Waterblock to the GTX 580/570 graphics card. 1) With the DVI ports facing you, remove the two (2) black screws and the four (4) hex screws from the DVI bracket. GTX 580/570 • frierlreireatrEeNfie 2) Flip the GTX 580/570 on its back and that the fan is pointed downwards. Remove all the screws from the underside of the GTX 580/570 (highlighted below). Now carefully remove the top portion on the heatsink from the GPU. _-110-wCOL .O PO :. ■ / o 4j- -WO-, 4() • •.•4 = Ati, • • • • v.., et . • -e• • • •. nCC O O uuuuuumuum.a.ca.le 4:37: • • GTX 580 - 20 Screws GTX 570 - 20 Screws 3) Remove all thermal paste and pads from the exposed GPU and memory. It is recommended to use 91% Isopropyl Alcohol to aid in removing the stock thermal paste. Once you have properly removed the thermal paste from the IHS and the Isopropyl Alcohol has completely dried, add a pea sized drop of the provided thermal paste to the center of the GPU. Also, peel off the protective film on the included thermal pads. See the pictures on next page: C V3 A Intelligent Innovation 1