EVGA P67 FTW User Guide - Page 34

EVGA P67 FTW Motherboard Appendix A. POST Codes This section provides the AMI POST Codes (Table 6) for the EVGA P67 FTW Motherboard during system boot up. The POST Codes are displayed on the Debug LED readout located directly onboard the motherboard. This Debug LED will also display current CPU temperatures after the system has fully booted into the Operating System. Debug LED with CPU Temperature Monitor Table 6. AMI POST Code 01 Power on. Reset type detection (soft/hard). 02 AP initialization before microcode loading 03 North Bridge initialization before microcode loading 04 South Bridge initialization before microcode loading 05 OEM initialization before microcode loading 06 Microcode loading 07 AP initialization after microcode loading 08 North Bridge initialization after microcode loading 09 South Bridge initialization after microcode loading 0A OEM initialization after microcode loading 0B Cache initialization 0C- Reserved for future AMI SEC error codes 0D 0E Microcode not found 0F Microcode not loaded 10 PEI Core is started 11- Pre-memory CPU initialization is started 14 15- Pre-memory North Bridge initialization is started 18 19- Pre-memory South Bridge initialization is started 34