EdgeStar AP13000W Owner's Manual - Page 14

Setting the Temperature To set the temperature in cooling mode, use the Minus and Plus buttons on the remote. The temperature range is 61° to 86° Fahrenheit. Adjust the temperature until you reach your desired setting. Turbo Mode In this mode, the air conditioner is set to run at the lowest temperature 61°F and high fan speed. To activate this function mode, press the TURBO button on the remote control ONLY. Timer (Delayed Switch ON/OFF) Function This function mode enables a delayed switch ON or OFF for this air conditioner. The time (hours) delay can be set, enable, and disabled from the both the remote control and control panel. SETTING DELAYED SWITCH ON TIMER FROM REMOTE CONTROL Switch on the air conditioner, select the function mode (cooling/ fan only / dehumidifying only), set temperature and fan speed. Then switch off the unit. To activate the delayed switch on function, press the ON timer button and set the desired time delay ON hours (from 1 to 12 hours) by pressing the ON timer button. Once the delayed switch on timer is set, press the SET timer button to confirm the setting. The symbol and the delay countdown timer will appear on the remote control display. When the delay time set has elapsed, the air conditioner switches on with last selected settings. To cancel the delayed switch on function, press timer button until symbol disappears on the display. SETTING SWITCH ON TIMER FROM CONTROL PANEL Switch on the air conditioner, select the function mode (cooling/ fan only / dehumidifying only), set temperature and fan speed. Then switch off the unit. Press the Timer button and set the desired time delay ON hours (from 1 to 12 hours) by pressing the + and - buttons. Once the delayed switch on timer is set, press the Timer button to confirm the setting. The symbol and the delay countdown timer will appear on the control panel display. When the delay time set has elapsed, the air conditioner switches on with last selected settings. To cancel the delayed switch on function, press Timer button until symbol disappears on the display. SETTING SWITCH OFF TIMER FROM REMOTE CONTROL With the air conditioner operating in any function mode, press the OFF timer button then set the desired time delay OFF hours (from 1 to 12 hours) by pressing the OFF timer button. Once the delayed switch off timer is set, press the SET timer button to confirm the setting. The symbol and the delay countdown timer will appear on the remote control display. When the delay time set has elapsed, the air conditioner switches off. To cancel the delayed switch off function, press until symbol disappears on the display. SETTING SWITCH OFF TIMER FROM CONTROL PANEL 11