EdgeStar CWB1760FD Owner s Manual - Page 8

Installation Clearance Requirements Important Notes: • Choose a location that has ambient temperatures above 65°F and below 90°F. Operation outside of these temperatures may result in lowered efficiency or cause other adverse effects. • This unit MUST be installed in an area protected from the elements, e.g., wind, rain, water spray or drips. • The wine and beverage cooler should not be located next to ovens, grills or other high heat sources. • Do not kink or pinch the power supply cord between the cooler and wall or cabinet. When installing the wine and beverage cooler under a counter, follow the recommended spacing dimensions shown. • To ensure proper service access and ventilation, allow at least 2-3" of clearance at the back of the unit. The installation should allow the unit to be pulled forward for servicing, if necessary. Side View • The wine and beverage cooler should be installed on a firm and level surface that will be able to support the entire weight of a fully loaded unit. It is important for the wine and beverage cooler to be level in order to work properly. If needed, you can adjust the height of the wine and beverage cooler by rotating the feet. See the "Leveling the Wine and beverage cooler" section. • A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with National Electrical Code and local codes and ordinances is required. EdgeStar Wine and Beverage Cooler 4