EdgeStar CWB1760FD Owner s Manual - Page 9
Electrical Requirements, Leveling the Wine and Beverage Cooler
View all EdgeStar CWB1760FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Electrical Requirements ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, electrical shock, or death. Before you move your wine and beverage cooler into its final location, it is important to make sure you have the proper electrical connection: A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required. It is recommended that a separate circuit, serving only your wine and beverage cooler, be provided. Use receptacles that cannot be turned off by a switch or pull chain. The fuse (or circuit breaker) size should be 3 Amps. Recommended grounding method For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged wall socket, and grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall socket is not available, it is the personal responsibility of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician. Leveling the Wine and Beverage Cooler It is important for the wine and beverage cooler to be leveled in order to work properly. It can be rsaised or lowered by rotating the plastic sheaths around each of the front two feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until the wine and beverage cooler becomes level .You may need to make several adjustments to level it. We recommend using a carpenter's level to check the machine. 1. Place a carpenter's level on top of the product to see if the wine and beverage cooler is level from front to back and side to side. 2. Adjust the height of the feet as follows: Turn the leveling feet clockwise to lower that side of the cooler. Turn the leveling feet counterclockwise to raise that side of the wine and beverage cooler. IMPORTANT: Once you are ready to install it in a cabinet or directly on the floor, you must adjust the front feet to level the wine and beverage cooler. 5