EdgeStar CWD1510W Owner's Manual - Page 12
Tools and Parts, Remove transport bolts
View all EdgeStar CWD1510W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PARTS INCLUDED Water Hoses (2) Transportation "Shipping" Plugs NOTE: As you unpack your unit you may find some residual water in the drum and/or coin trap as we test all of our units for quality assurance. Tools and Parts Gather the required tools and accessories (Water hoses (2), Transportation "Shipping" Plugs and wrench are supplied with unit) before starting installation. 1/4" nut driver or a ratchet with a 1/2" socket 11/16" open-end wrench Needle nose vise grips Carpenter's level Water Hoses (2)- provided in drum Cable Tie Transportation "Shipping" Hole Plugs (4)- provided in drum Unpacking the washing machine Unpack your washer/dryer combo and inspect for damage that may have occurred during transportation. If there is any damage to the washing machine or any item is missing, please contact your dealer immediately. Important, you will need all of your packaging including transportation "shipping" bolts if you need to send back to manufacturer. Dispose of the packing materials: The packing materials of this machine may be dangerous to children. Once you have inspected machine and find unit satisfactory, please dispose of them properly. Please dispose of the related packing materials according to the relevant local regulations. Remove transport bolts Before using this washing machine, transport "shipping" bolts must be removed from the backside of this machine. Please follow the steps below to remove the transport bolts: 1. Loosen all bolts and completely remove them along with the bushings (bearings). 2. Cover the holes with transport hole plugs. 3. Important- Keep the transport "shipping" bolts in case you need for future use. - Transportation "Shipping" Bolts 7