EdgeStar CWD1510W Owner's Manual - Page 15

Level the washer When positioning the washer/dryer combo, please first check if the legs are closely attached to the cabinet. If not, please turn them to their original positions by hand or with wrench and tighten the nuts with wrench. After positioning the washing machine, apply pressure on each corner of the combo in sequence. If the unit is unstable when being pressed, the legs must be adjusted to level the machine. Ensure the positioning status of the machine. Loosen the lock nut with a wrench and turn the leg by hand until it tightly contacts the floor. Hold the leg with one hand and fasten the nut closely to the cabinet with the other hand. After being locked properly, press down on each corner of unit again to make sure that they have been adjusted properly. If it is still unstable, repeat steps above until unit has no give. At this time, double check by placing a level on top surface of the unit to ensure unit is properly adjusted. EdgeStar Washer/Dryer Combo 10