EdgeStar CWR262DZ Owner's Manual - Page 15

Troubleshooting continued

Page 15 highlights

Troubleshooting continued Issue The wine cooler does not turn on. Possible cause There is a power failure. The cooler is not plugged in. A house fuse has blown or the circuit breaker is tripped. Solution Ensure the cooler is plugged in and the power outlet has power. Plug the unit in to a power outlet that has sufficient amperage. Replace the broken fuse in your fuse box or reset the breaker. The wine cooler will not reach the desired temperature The cooler is placed too close to a heat source. The cooler does not have sufficient ventilation. The door is opened too frequently or for a long period of time. Keep the cooler away from direct sun light or other heat sources. Read and follow the "Installation Clearance Requirements" section. Close the door tightly and do not open the door too frequently or for a long period of time. Certain sounds are normal. The wine cooler is making strange noises The unit is not level or is touching another appliance. Read the "Normal Sounds" section. Check to make sure that the cooler is level, and that it is not in contact with another appliance or furniture. The body of the wine The unit is not grounded refrigerator is electrified. properly. Contact your local electrician to test your electrical grounding system. Frost is forming in the wine cooler. The door will not shut properly. The environment is humid. The ambient temperature is too low. The door is being opened too frequently. Though the unit uses an "auto-defrost" system, under certain conditions, manual defrosting may be required. If frost builds up, you can try running the cooler on a warmer temperature setting, minimizing the number of times you open the door, or unplugging the unit to allow the frost to melt. Your cooler is not level. Make sure the cooler is on a level surface. The door gasket is dirty. Clean the door gasket. The door gasket is not installed correctly. The shelves are incorrectly installed. Make sure the door gasket is properly installed. Correctly install the shelves. EdgeStar Wine Refrigerator 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

EdgeStar Wine Refrigerator
12
Troubleshooting continued
Issue
Possible cause
Solution
The wine cooler does not
turn on.
There is a power failure.
Ensure the cooler is plugged in and the power outlet has
power.
The cooler is not plugged in.
Plug the unit in to a power outlet that has sufficient
amperage.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in your fuse box or reset the
breaker.
The wine cooler will not
reach the desired
temperature
The cooler is placed too
close to a heat source.
Keep the cooler away from direct sun light or other heat
sources.
The cooler does not have
sufficient ventilation.
Read and follow
the “Installation Clearance Requirements”
section.
The door is opened too
frequently or for a long
period of time.
Close the door tightly and do not open the door too
frequently or for a long period of time.
The wine cooler is making
strange noises
Certain sounds are normal.
Read the “Normal Sounds” section.
The unit is not level or is
touching another appliance.
Check to make sure that the cooler is level, and that it is
not in contact with another appliance or furniture.
The body of the wine
refrigerator is electrified.
The unit is not grounded
properly.
Contact your local electrician to test your electrical
grounding system.
Frost is forming in the
wine cooler.
The environment is humid.
Though the unit uses an “auto
-
defrost”
system, under
certain conditions, manual defrosting may be required. If
frost builds up, you can try running the cooler on a warmer
temperature setting, minimizing the number of times you
open the door, or unplugging the unit to allow the frost to
melt.
The ambient temperature is
too low.
The door is being opened
too frequently.
The door will not shut
properly.
Your cooler is not level.
Make sure the cooler is on a level surface.
The door gasket is dirty.
Clean the door gasket.
The door gasket is not
installed correctly.
Make sure the door gasket is properly installed.
The shelves are incorrectly
installed.
Correctly install the shelves.