EdgeStar DWP40BL Owner's Manual - Page 7

Using a rinsing agent Add the rinse aid at the hole 7-41111k_ You can help prevent unsightly spots on dishes and glassware, and reduce drying time by using a rinse agent. A rinse agent is specially formulated to rinse away food and detergent residues that can be left behind on your dishes. Used regularly, a rinse agent will automatically provide you with cleaner dishes every time you wash. To fill the rinse agent dispenser, unscrew the dispenser cap located on the back of the tub. Add the rinse agent slowly into the container until it just reaches the bottom of the filling cap inside the dispenser opening. Replace the cap. Note: Clean off large particles of food sediments before placing dishes in the dishwasher. Using the "Sanitary-Wash" feature If you have connected the washer to a cold water supply, you will need to leave it in the "SaniWash" setting. The "Sani-Wash" feature gives you the option of washing/drying dishes at high water temperatures. When activated, the "Sani-Wash" feature energizes a heating element that will raise and maintain the internal water temperature of the dishwasher at 144°F. Refer to Page 1, Front View, Item 6. ! CAUTION ! Water temperatures this high can cause severe burns/scalding. Always exercise extreme care when opening and/or entering the dishwasher during the Sani-Wash cycle. To activate this feature, set the "Sani/Econo" button to the "in" position. Using the "Econo" Feature: The "Econo" feature gives you the option of washing dishes at the temperature of your hot water supply. The heating element will not come on. To activate, set the "Sani/Econo" button to the "out" position. 6