EdgeStar FP630 Owner's Manual - Page 6
Proper Location, Handling and Installation - portable fridge
View all EdgeStar FP630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
NOTE: Because this unit is compressor based, ample space is required around the unit to allow it to exhaust properly. Proper Location Position your portable freezer in a location where there is proper air circulation and electrical connections. Keep the portable freezer away from heat and direct sunlight if possible. This portable freezer is suitable for car use and camping however, the appliance should not be exposed to rain or any other severe weather elements. This portable freezer should not be placed in a built-in or recessed area. It is designed to be freestanding. The normal operation of the freezer depends on heat radiation from the condenser. For the initial use, remove all packaging and allow at least 6" of room around the freezer (2" inches at side, 4" at rear of unit). Handling and Installation 1. Remove all interior and exterior packaging. 2. Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and corrosive gas. 3. Clean the interior surface with a little bit of lukewarm water and a soft cloth. 4. When inserting the AC power-cord into the power socket, make sure the power socket is a grounded 115V~AC / 60Hz socket. Also make sure that the unit's grounding prong has not being tampered with. Note: When inserting the DC power-cord, make sure the input is a 12V~DC / 24V power source. 5. When moving the freezer, always use both handles to the carry the unit as level as possible. This is in order to protect the compressor and the sealed system. WARNING: Use two or more people to move and handle this unit. Failure to do so can result in back or other injury. Carefully remove the packaging materials and any shipping tape before using. IMPORTANT: Do not remove any safety, warning, or product information labels from your portable fridge/freezer. 3