EdgeStar FP630 Owner's Manual - Page 8

Note: Do not use the refrigerator-freezer as refrigerator when the ambient temperature is lower than 41°F Note: Do not run the unit on "FF" (fast freeze) for more than four hours, as this might adversely affect the refrigeration system. Note: Never remove ice with a sharp object or screwdriver. Temperature Adjustment 1. When the freezer is plugged in to a power outlet, press the "set" button. The LED will display the factory pre-set temperature of 0°F 2. To adjust the temperature: a. Press the "set" button again b. While the LED is flashing, press the "▲" or "▼" buttons to reach the desired temperature c. Once you have reached your desired set temperature, wait until the LED stops flashing. The current internal temperature will then be displayed. After the LED has stopped flashing, you can check the set temperature by pressing the set button again d. To change the preset temperature again repeat steps a., b. and c. Fast Freeze Mode Press the "FF" button to run the freezer on the "Fast Freeze" mode. The Fast Freeze mode rapidly cools the unit to -8°F. The freezer will then maintain this temperature. Food Storage Fresh foods should not be stored together with frozen foods. When the temperature is set below 32°F, do not keep glass-bottled drinks such as beer and lemonade, as the bottles might shatter. Defrosting and Deodorizing When the ice layer on the inner cabinet sides is over 0.2", the defrosting operation should be performed to improve the refrigerating efficiency. To do this, follow these steps below: 1. Turn off the power, and remove all items located within the chest. 2. Allow the ice to completely melt and discard water. Tip: To remove bad odors place a piece of charcoal in the chest 5