EdgeStar IB120SS Owner's Manual - Page 3

You Must Use A Licensed Plumber - reviews

Get EdgeStar IB120SS PDF manuals and user guides View all EdgeStar IB120SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

¾ ELECTRICAL CONNECTION aWARNINGa IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED SERVICER. • THIS ICE MAKER SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER CORD OF THIS ICE MAKER IS EQUIPPED WITH A THREE-PRONG PLUG WHICH MATES WITH STANDARD THREE PRONG WALL OUTLETS TO MINIMIZE THE POSSIBILITY OF ELECTRICAL SHOCK. • DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD SUPPLIED. • DO NOT USE AN EXTENSION CORD TO CONNECT POWER TO THE UNIT. • DO NOT USE A TWO-PRONG GROUNDING ADAPTER. • IF YOU ONLY HAVE A TWO-PRONG WALL RECEPTACLE, CONTACT A QUALIFIED ELECTRICIAN TO HAVE IT REPLACED WITH A 3-PRONG RECEPTACLE IN ACCORDANCE WITH APPLICABLE ELECTRICAL CODES. • THIS ICE MAKER REQUIRES A STANDARD 115 VOLTS A.C. 60HZ ELECTRICAL OUTLET WITH THREE-PRONG GROUND. • THE CORD SHOULD BE SECURED BEHIND THE ICE MAKER AND NOT LEFT EXPOSED OR LOOSE. ¾ EXTENSION CORD BECAUSE OF POTENTIAL SAFETY HAZARDS, THIS APPLIANCE IS NOT RECOMMENDED FOR USE WITH AN EXTENSION CORD. HOWEVER, IF YOU MUST USE AN EXTENSION CORD, USE ONLY A UL/CUL-LISTED, 3-WIRE GROUNDING TYPE APPLIANCE EXTENSION CORD WITH A GROUNDING TYPE PLUG AND OUTLET. THE ELECTRICAL RATING OF THE CORD MUST BE 115 VOLTS AND AT LEAST 10 AMPS. ¾ CONNECTING THE WATER SUPPLY aWARNINGa IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING YOU MUST USE A LICENSED PLUMBER REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION • ALL THE NECESSARY HARDWARE IS NOT PROVIDED (AS THE PLUMBING FIXTURES AT THE INSTALLATION POINT MAY DIFFER) FOR INSTALLATION SO IT IS NECESSARY TO HIRE A PROFESSIONAL LICENSED PLUMBER TO COMPLETE THE INSTALLATION. • CONNECT TUBING (SUPPLIED WITH UNIT) TO THE NEAREST COLD WATER SOURCE. CONNECT SUFFICIENT TUBING TO THE UNIT TO ALLOW THE APPLIANCE TO BE MOVED FREELY FOR CLEANING AND SERVICE. ALSO MAKE SURE THAT THE TUBING IS NOT PINCHED OR DAMAGED DURING TRANSPORTATION/INSTALLATION. • POSITION UNIT TO ALLOW FREE AIRFLOW THROUGH THE FRONT GRILL (SEE FIGURE 1). • WIPE OUT INSIDE OF UNIT AND ICE BUCKET WITH A DAMP CLOTH. FIGURE 1 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
ELECTRICAL CONNECTION
WARNING
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL
SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED
SERVICER.
•
THIS
ICE
MAKER
SHOULD
BE
PROPERLY
GROUNDED
FOR
YOUR
SAFETY.
THE
POWER
CORD
OF
THIS
ICE
MAKER
IS
EQUIPPED
WITH
A
THREE-PRONG
PLUG
WHICH
MATES
WITH
STANDARD
THREE
PRONG
WALL
OUTLETS
TO
MINIMIZE
THE
POSSIBILITY
OF
ELECTRICAL
SHOCK.
•
DO
NOT
UNDER
ANY
CIRCUMSTANCES
CUT
OR
REMOVE
THE
THIRD
GROUND
PRONG
FROM
THE
POWER
CORD
SUPPLIED.
•
DO
NOT
USE
AN
EXTENSION
CORD
TO
CONNECT
POWER
TO
THE
UNIT.
•
DO
NOT
USE
A
TWO-PRONG
GROUNDING
ADAPTER.
•
IF
YOU
ONLY
HAVE
A
TWO-PRONG
WALL
RECEPTACLE,
CONTACT
A
QUALIFIED
ELECTRICIAN
TO
HAVE
IT
REPLACED
WITH
A
3-PRONG
RECEPTACLE
IN
ACCORDANCE
WITH
APPLICABLE
ELECTRICAL
CODES.
•
THIS
ICE
MAKER
REQUIRES
A
STANDARD
115
VOLTS
A.C.
60HZ
ELECTRICAL
OUTLET
WITH
THREE-PRONG
GROUND.
•
THE
CORD
SHOULD
BE
SECURED
BEHIND
THE
ICE
MAKER
AND
NOT
LEFT
EXPOSED
OR
LOOSE.
EXTENSION CORD
BECAUSE OF POTENTIAL SAFETY HAZARDS, THIS APPLIANCE IS NOT RECOMMENDED FOR
USE WITH AN EXTENSION CORD. HOWEVER, IF YOU MUST USE AN EXTENSION CORD, USE
ONLY A UL/CUL-LISTED, 3-WIRE GROUNDING TYPE APPLIANCE EXTENSION CORD WITH A
GROUNDING TYPE PLUG AND OUTLET. THE ELECTRICAL RATING OF THE CORD MUST BE 115
VOLTS AND AT LEAST 10 AMPS.
CONNECTING
THE
WATER
SUPPLY
WARNING
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING
YOU MUST USE A LICENSED PLUMBER
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION
•
ALL
THE
NECESSARY
HARDWARE
IS
NOT
PROVIDED
(AS
THE
PLUMBING
FIXTURES
AT
THE
INSTALLATION
POINT
MAY
DIFFER)
FOR
INSTALLATION
SO
IT
IS
NECESSARY
TO
HIRE
A
PROFESSIONAL
LICENSED
PLUMBER
TO
COMPLETE
THE
INSTALLATION.
•
CONNECT
TUBING
(SUPPLIED
WITH
UNIT)
TO
THE
NEAREST
COLD
WATER
SOURCE.
CONNECT
SUFFICIENT
TUBING
TO
THE
UNIT
TO
ALLOW
THE
APPLIANCE
TO
BE
MOVED
FREELY
FOR
CLEANING
AND
SERVICE.
ALSO
MAKE
SURE
THAT
THE
TUBING
IS
NOT
PINCHED
OR
DAMAGED
DURING
TRANSPORTATION/INSTALLATION.
FIGURE 1
•
POSITION
UNIT
TO
ALLOW
FREE
AIRFLOW
THROUGH
THE
FRONT
GRILL
(SEE
FIGURE
1).
•
WIPE
OUT
INSIDE
OF
UNIT
AND
ICE
BUCKET
WITH
A
DAMP
CLOTH.
2