EdgeStar IB120SS Owner's Manual - Page 5

Moving Your Ice Maker - ice maker assembly

Get EdgeStar IB120SS PDF manuals and user guides View all EdgeStar IB120SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

• THE STAINLESS STEEL COMPONENTS OF THE DOOR SHOULD BE CLEANED WITH STAINLESS STEEL CLEANER • THE CONDENSER COILS SHOULD BE VACUUMED WHEN THEY ARE DUSTY OR DIRTY. CAUTION FAILURE TO UNPLUG THE ICE MAKER WHEN CLEANING, MOVING, OR SERVICING IT COULD RESULT IN ELECTRICAL SHOCK OR PERSONAL INJURY. ¾ POWER FAILURE MOST POWER FAILURES ARE CORRECTED WITHIN A FEW HOURS AND SHOULD NOT AFFECT THE TEMPERATURE OF YOUR ICE MAKER IF YOU MINIMIZE THE NUMBER OF TIMES THE DOOR IS OPENED. IF THE POWER IS GOING TO BE OFF FOR A LONGER PERIOD OF TIME, YOU SHOULD TAKE THE PROPER STEPS TO DISCONNECT YOUR APPLIANCE. ¾ VACATION TIME/STORAGE 1. SHUT OFF THE WATER SUPPLY AT THE MAIN WATER VALVE. 2. DISCONNECT THE WATER SUPPLY LINE FROM THE VALVE. 3. ALLOW THE UNIT TO RUN FOR AN HOUR OR TWO UNTIL ALL REMAINING ICE CUBES HAVE BEEN EJECTED AND ALL WATER HAS CYCLED THROUGH THE SYSTEM AND HAS BEEN MADE INTO ICE CUBES. 4. DISCONNECT THE UNIT FROM THE MAIN POWER SOURCE. 5. DRY OUT EXCESS WATER FROM THE ICE MAKER ASSEMBLY 6. LEAVE THE DOOR OPEN AT LEAST TWO INCHES. ¾ MOVING YOUR ICE MAKER • SECURELY TAPE DOWN ALL LOOSE ITEMS INSIDE YOUR ICE MAKER. • TURN THE LEVELING SCREWS UP TO THE BASE (THEIR SHORTEST LENGTH POSSIBLE) TO AVOID DAMAGE. • TAPE THE DOOR SHUT. • MAKE SURE THE ICE MAKER STAYS IN THE UPRIGHT POSITION DURING TRANSPORTATION. ¾ ENERGY SAVING TIPS • THE ICE MAKER SHOULD BE LOCATED IN THE COOLEST AREA OF THE ROOM, AWAY FROM HEAT SOURCES, AND OUT OF THE DIRECT SUNLIGHT. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
•
THE
STAINLESS
STEEL
COMPONENTS
OF
THE
DOOR
SHOULD
BE
CLEANED
WITH
STAINLESS
STEEL
CLEANER
•
THE
CONDENSER
COILS
SHOULD
BE
VACUUMED
WHEN
THEY
ARE
DUSTY
OR
DIRTY.
CAUTION
FAILURE
TO
UNPLUG
THE
ICE
MAKER
WHEN
CLEANING,
MOVING,
OR
SERVICING
IT
COULD
RESULT
IN
ELECTRICAL
SHOCK
OR
PERSONAL
INJURY.
POWER FAILURE
MOST
POWER
FAILURES
ARE
CORRECTED
WITHIN
A
FEW
HOURS
AND
SHOULD
NOT
AFFECT
THE
TEMPERATURE
OF
YOUR
ICE
MAKER
IF
YOU
MINIMIZE
THE
NUMBER
OF
TIMES
THE
DOOR
IS
OPENED.
IF
THE
POWER
IS
GOING
TO
BE
OFF
FOR
A
LONGER
PERIOD
OF
TIME,
YOU
SHOULD
TAKE
THE
PROPER
STEPS
TO
DISCONNECT
YOUR
APPLIANCE.
VACATION TIME/STORAGE
1.
SHUT
OFF
THE
WATER
SUPPLY
AT
THE
MAIN
WATER
VALVE.
2.
DISCONNECT
THE
WATER
SUPPLY
LINE
FROM
THE
VALVE.
3.
ALLOW
THE
UNIT
TO
RUN
FOR
AN
HOUR
OR
TWO
UNTIL
ALL
REMAINING
ICE
CUBES
HAVE
BEEN
EJECTED
AND
ALL
WATER
HAS
CYCLED
THROUGH
THE
SYSTEM
AND
HAS
BEEN
MADE
INTO
ICE
CUBES.
4.
DISCONNECT
THE
UNIT
FROM
THE
MAIN
POWER
SOURCE.
5.
DRY
OUT
EXCESS
WATER
FROM
THE
ICE
MAKER
ASSEMBLY
6.
LEAVE
THE
DOOR
OPEN
AT
LEAST
TWO
INCHES.
MOVING YOUR ICE MAKER
•
SECURELY
TAPE
DOWN
ALL
LOOSE
ITEMS
INSIDE
YOUR
ICE
MAKER.
•
TURN
THE
LEVELING
SCREWS
UP
TO
THE
BASE
(THEIR
SHORTEST
LENGTH
POSSIBLE)
TO
AVOID
DAMAGE.
•
TAPE
THE
DOOR
SHUT.
•
MAKE
SURE
THE
ICE
MAKER
STAYS
IN
THE
UPRIGHT
POSITION
DURING
TRANSPORTATION.
ENERGY SAVING TIPS
•
THE
ICE
MAKER
SHOULD
BE
LOCATED
IN
THE
COOLEST
AREA
OF
THE
ROOM,
AWAY
FROM
HEAT
SOURCES,
AND
OUT
OF
THE
DIRECT
SUNLIGHT.
4