EdgeStar KC2000TWINKOM Owner s Manual - Page 9

Note: Allow the refrigerator to stand in an upright position for 24 hours before turning on the power. This will ensure that the coolant has settled. Installing the Casters This unit comes with four casters. These are an optional accessary to assemble if you would like to make the unit more mobile. To install the casters: 1. Remove the four leveling legs from the bottom of the unit. 2. With the contents inside the cabinet removed, set the beer dispenser on its side. 3. Screw in the caster to attach it to the cabinet. 4. With all four casters tightened evenly, stand the unit in an upright position. OPERATION Installation Check List before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the kegerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the kegerator? 3. Has the machine been leveled? 4. Is the kegerator in a site where the ambient temperature is between 50º F and 95º F all year round? Using the Temperature Control Panel Note: Whether your kegerator can reach cooler temperature depends on the ambient environmental conditions. Caution: If you powered off the unit, please wait at least 5 minutes before powering it back on. EdgeStar Kegerator This kegerator has one control knob located on the left of the inside of the cabinet. Turning the knob to the right or left will make the unit colder or warmer respectively; 1 being the warmest and 6 the coldest. WARNING: Kegerator should only be set to the coldest setting (6) for short periods of time while dispensing. If the kegerator is set to the coldest setting for an extended period of time, your keg will freeze. For keg storage, we recommend setting the knob between 4 and 5. 6