EdgeStar WAC8000W Owner's Manual - Page 7
Preparations for Installation
View all EdgeStar WAC8000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Tools Needed: Flat Screwdriver Phillips Screwdriver Tape Measure Level Drill PARTS SUPPLIED: Preparations for Installation NOTE: To avoid risk of injury and/or product/property damage, please take the following precautions: - Two or more people are needed to properly handle and install. - Use proper lifting and carrying techniques. - Before installation, make sure to inspect the window and sill are able to handle the weight and size of this unit. - Wearing protective gloves will help to avoid injury from sharp edges. Before you begin, make sure you have all the parts necessary for installation. (3) #10 x ½" Phillip Screws (1) Top Channel (7) #10 x 3/4" Flat Screws (5) #10 x ¼" Phillip Screws (1) Window Sash Seal (1) Foam Seal (1) Set of Side Curtains (2) Safety Lock (vinyl windows) (1) Window Lock Bracket (5) Weather Seals NOTE: You may need to contact your electrician if your room's circuit is not able to power your unit. If you have multiple windows, choose one that is near an electrical outlet that will be able to provide sufficient power to your unit. See the power requirements listed on the product label printed on the side, or on the back of your window air conditioner. The following measurements are required to properly install the air conditioner. Window Width: 26 7/8" to 36" Window Minimum Height: 16 ½" KoldFront Window Air Conditioner 4