Edimax AR-7211B V2 Manual - Page 35
Field, Description, Continuous, Connect, on Demand, Manual, Continuous, Connect on Demand
View all Edimax AR-7211B V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Field Description Obtain an IP address When this is selected, DHCP assigns IP address for automatically the PPPoE connection. When this is selected, you need to enter an IP Use the following IP address address for the PPPoE connection, which is provided by your ISP. Check this box to enable network address translation (NAT). If you do not select it and wish Enable NAT to access the Internet normally, you must add a route on the uplink equipment. Usually, it is required to enable NAT. Click Next to continue to the next page: Field PPP Username PPP Password PPP Connection Type Description Enter the username for PPPoE dial-up, which is provided by your ISP. Enter the password for PPPoE dial-up, which is provided by your ISP. You can select Continuous (recommended), Connect on Demand, or Manual. Continuous: After dial-up is successful, PPPoE connection is always on-line, whether the data is being transmitted or not. Connect on Demand: After dial-up is successful, if no data is transmitted for the preset idle time, the router automatically disconnects the PPPoE 35