Edimax AR-7211B V2 Manual - Page 78
Others, Advanced > Others, Bridge Setting, Client Limit, 6.5.1., Field, Description, Disabled,
View all Edimax AR-7211B V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Community name (read- The network administrators must use this password to only) read the information of this router. Community name (read- The network administrators must use this password to write) configure the information of the router. 5.6.5. Others Select Advanced > Others. The submenu contains Bridge Setting, Client Limit and Others. 5.6.5.1. Bridge Setting Click Bridge Setting in the left pane and you will arrive at the following page. This page is used to configure the bridge parameters. You can change the settings or view some information on the bridge and its attached ports. Field Description Aging Time If the host is idle for 300 seconds (default value), its entry is deleted from the bridge table. 802.1d Spanning You can select Disabled or Enabled. Tree Select Enabled to provide path redundancy while preventing undesirable loops in your network. Show MACs Click to show a list of the learned MAC addresses for the bridge. Click Show MACs and the following page will appear. This table shows a list of learned MAC addresses for this bridge. 78