Edimax CV-7438nDM Quick Install Guide - Page 10
wireless router/access point, seconds, flash, II-2. WPS Setup Step
View all Edimax CV-7438nDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Press and hold the WPS button on your wireless router/access point for the correct length of time to activate its WPS. Please check the instructions for your wireless router/access point to confirm how long you need to hold down its WPS button to activate WPS for 2.4GHz or 5GHz. Some brands of router/access point may not support WPS for 5GHz - in this case, please refer to II-1. iQ Setup instead. 3. Within two minutes, press and hold the WPS button on the CV-7438nDM for 2 seconds to activate the WPS function. The LED should flash (white) to indicate that WPS is in progress. 4. The devices will establish a connection. When a connection is successful, the bridge's LED will display on (white). If a connection is not successful, the LED will flash (red) - in this case please return to II-2. WPS Setup Step 1. 9