Edimax CV-7438nDM Quick Install Guide - Page 9
II-2., WPS Setup, flashing
View all Edimax CV-7438nDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. A congratulations screen will confirm your wireless bridge has established a connection. If you do not see the congratulations screen shown above, check the LED: if the LED displays on (white) then the wireless bridge has successfully established a connection. Continue to III. Using the CV-7438nDM. When the Wi-Fi bridge's LED displays on (white), the wireless bridge is now ready for use with audio speakers or Ethernet devices such as smart TVs, set-top boxes or game consoles. Please see III. Using the CV-7438nDM. II-2. WPS Setup WPS setup is an alternative to II-1. iQ Setup. If you already completed iQ Setup, please continue to III. Using the CV-7438nDM. The WPS button is a quick and easy method to establish a secure connection between your wireless bridge and wireless router/access point. The wireless bridge can connect to either 2.4GHz or 5GHz Wi-Fi networks via WPS, depending on which frequency's WPS is active on your wireless router/access point. 1. Plug the power adapter into the device's 5V power port, plug the adapter into a wall socket or available USB port, and press the power on/off button to switch the device on. The CV-7438nDM may take several minutes to boot up - the device is ready when the LED is flashing (red). The CV-7438nDM requires 1 A of current - please ensure that your USB port can provide sufficient power. If not, use the 5V DC adapter. 8