Edimax ES-3305P V2 Quick Install Guide - Page 4

Back Panel 5 Port Fast Ethernet Desktop Switch RJ-45 Ports 1 - 5 5V DC Power Port 8 Port Fast Ethernet Desktop Switch RJ-45 Ports 1 - 8 5V DC Power Port Operating Environment This switching hub must be installed and operated within the limits of the specified operating temperature 0~40°C (32~104°F) and humidity (10~90% Non-condensing). - Do not place objects on top of the unit. - Do not obstruct any vents at the sides of the unit. - Do not position the unit near any heating source such as a heater, radiator or in direct exposure to sun. - Take care to ensure the unit does not come into contact with water. Consider using a dehumidifier to reduce humidity and prevent moisture entering the unit. Connecting to network devices The RJ-45 ports on the switch support Auto-MDI/MDI-X which allows both straight-through or cross-over type cables to connect this switch to a workstation or hub. Connect one end of the network cable to the RJ-45 port on the rear panel, and connect the other end of the network cable to the RJ-45 port on the network device. Follow the same procedure to connect all RJ-45 ports of the switch. 4