Edimax ES-5240G V2 Manual - Page 13

Management guide

Get Edimax ES-5240G V2 PDF manuals and user guides View all Edimax ES-5240G V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Management guide Access the management interface of the Switch This section instructs you how to enter and proceed with the advanced management capability, which can be accessed through console port or Internet Browser over the network (in-band). Manage the device via command line interface To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows.) The terminal emulation software should be started as the following configuration: 1. Data rate: 115200 baud. 2. Data format: 8 data bits, 1 stop bit and no parity. 3. Flow control: none. 4. Click the property icon, select settings, make sure that: "The Function, arrow, and ctrl keys act as": Terminal keys. "Emulation": VT100. Note: To manage via command line interface, please find the "Appendix" for more information. Manage the device via WEB browser To access the Web-based management interface, you should configure the management station with an IP address and subnet mask that compatible to your switch. The factory default value of the switch: IP： Subnet Mask： Default Gateway： 192.168.2.1 255.255.255.0 192.168.2.254 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
12
Management guide
Access the management interface of the
Switch
This section instructs you how to enter and proceed with the advanced
management capability, which can be accessed through console port or
Internet Browser over the network (in-band).
Manage the device via command line interface
To start-up the command line interface, please connect a PC COM port to
the RS-232 connector and activate a terminal emulation software (e.g.
HyperTerminal of Windows.)
The terminal emulation software should be started as the following
configuration:
1.
Data rate: 115200 baud.
2.
Data format: 8 data bits, 1 stop bit and no parity.
3.
Flow control: none.
4.
Click the property icon, select settings, make sure that:
“The Function, arrow, and ctrl keys act as”: Terminal keys.
“Emulation”: VT100.
Note:
To manage via command line interface, please find the “Appendix” for
more information.
Manage the device via WEB browser
To access the Web-based management interface, you should configure the
management station with an IP address and subnet mask that compatible to
your switch.
The factory default value of the switch:
IP
：
192.168.2.1
Subnet Mask
：
255.255.255.0
Default Gateway
：
192.168.2.254