Edimax ES-5240G V2 Manual - Page 41

Appendix- Command Line Interface

Get Edimax ES-5240G V2 PDF manuals and user guides View all Edimax ES-5240G V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Appendix- Command Line Interface Start-up and Terminal configuration To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows). The terminal emulation software should be started as the following configuration: 1. Data rate: 115200 baud. 2. Data format: 8 data bits, 1 stop bit and no parity. 3. Flow control: none. 4. Click the property icon, select settings, make sure that: "The Function, arrow, and ctrl keys act as": Terminal keys. "Emulation": VT 100. Login/Logout Procedures To get access to the CLI, you will have to Key in the password to pass the authentication. The factory default value of Password is blank, or other random value. Note: We recommend users to configure a new password to prevent unauthorized users from accessing to the device. 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
40
Appendix- Command Line Interface
Start-up and Terminal configuration
To start-up the command line interface, please connect a PC COM port to
the RS-232 connector and activate a terminal emulation software (e.g.
HyperTerminal of Windows).
The terminal emulation software should be started as the following
configuration:
1.
Data rate: 115200 baud.
2.
Data format: 8 data bits, 1 stop bit and no parity.
3.
Flow control: none.
4.
Click the property icon, select settings, make sure that:
“The Function, arrow, and ctrl keys act as”: Terminal keys.
“Emulation”: VT 100.
Login/Logout Procedures
To get access to the CLI, you will have to Key in the password to pass the
authentication. The factory default value of Password is blank, or other
random value.
Note:
We recommend users to configure a new password to prevent
unauthorized users from accessing to the device.