Edimax EW-7228APn Quick Install Guide - Page 9
Security Settings
View all Edimax EW-7228APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Note: Please do not choose "Apply" at this point. It is necessary to continue and configure the security settings of the access point before it can function. 4. Select "Security" from the left sidebar in the Edimax web management interface. This will take you to the screen shown below. Under the heading "Security Settings", open the menu labeled "Encryption". Select the appropriate type of encryption, based on the security settings in your existing Wi-Fi network, as displayed in Step 1. In this example, we select "WPA pre-shared key". Note: You need to select the same encryption as your existing Wi-Fi network, otherwise this repeater mode cannot connect to it. 5. Then you need to enter your existing network security settings. 8
8
Note
: Please do not choose
“
Apply
”
at this point. It is
necessary to continue and configure the security
settings of the access point before it can function.
4.
Select
“
Security
”
from the left sidebar in the Edimax web management
interface. This will take you to the screen shown below. Under the heading
“
Security Settings
”
, open the menu labeled
“
Encryption
”
.
Select the appropriate type of encryption, based on the security settings in
your existing Wi-Fi network, as displayed in
Step 1
. In this example, we
select
“
WPA pre-shared key
”
.
Note
: You need to select the same encryption as your
existing Wi-Fi network, otherwise this repeater mode
cannot connect to it.
5.
Then you need to enter your existing network security settings.