Edimax EW-7438APn Manual - Page 16
II-3., Wi-Fi Protected Setup WPS, flashing - reset
View all Edimax EW-7438APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
II-3. Wi-Fi Protected Setup (WPS) After you have set up the access point as explained in II. Installation you can use the WPS button to establish a connection between the access point and a WPS-compatible wireless device/client. 1. Press and hold the WPS/Reset button on the front of the access point for 2 seconds. Release the button when the green WPS LED is flashing. 2. Within two minutes, activate WPS on your WPS-compatible wireless device. Please check the documentation for your wireless device for information regarding its WPS function. 3. The devices will establish a connection. The access point's green WPS LED will display on for 5 minutes to indicate a successful connection. 16
16
II-3.
Wi-Fi Protected Setup (WPS)
After you have set up the access point as explained in
II. Installation
you can
use the WPS button to establish a connection between the access point and a
WPS-compatible wireless device/client.
1.
Press and hold the WPS/Reset button on the
front of the access point for 2 seconds.
Release the button when the
green
WPS LED
is
flashing
.
2.
Within two minutes, activate WPS on your WPS-compatible wireless
device. Please check the documentation for your wireless device for
information regarding its WPS function.
3.
The devices will establish a connection. The
access point’s
green
WPS LED
will display
on
for 5 minutes to indicate a successful connection.