Edimax IC-3115W Manual - Page 140
> Basic -> LED light.
View all Edimax IC-3115W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
10.4 Troubleshooting Please don't panic if you find this network camera is not working properly. Before you send this network camera back to us, you can do some simple checks to save your time: Problem description Can't connect to the network camera Possible solution(s) 1) Please check the IP address of the network camera again. 2) Please make sure the network cable is correctly connected to your local area network. 3) Please make sure power cable is correctly connected to the network camera. No network camera found No image 4) Please make sure the network camera is switched on (the LED lights on the network camera will light up), if LED lights are not switched off in the configuration menu (System -> Basic -> LED light). 1) The 'auto search' function only works on network cameras located on local area network. 1) If the place where the network camera is installed is too dark, try to add some lights when possible. 2) Check if there's anything covering the lens. 139