Edimax IC-3115W Manual - Page 44
to a lower value.
View all Edimax IC-3115W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Sensitivity Threshold Refresh Save Move the mouse to a corner or the middle of an edge of the motion detection rectangle, and click and drag the mouse. To move the motion detection area: Position the mouse within the motion detection area, and click and drag the mouse. Change the sensitivity of motion detection. Set to a higher value (right) and the network camera will trigger the alarm when there are only small changes in video. If you find that the network camera sends emails or uploads pictures to FTP too frequently, and there's nothing happening in the snapshot, you can set this to a lower value. Set the motion detection threshold here (input number 0 to 100). A higher value means the network camera will only trigger an alarm when the object in the motion detection area is really big. Refresh the reference picture. Save changes you made in this page. 43