Edimax IR-123E Manual - Page 12
Locate the SD card slot
View all Edimax IR-123E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Note: The bracket is an optional extra. 8. Repower on the camera and refer to the following procedures to access and configure it. 9. If this IP Bullet camera is connected to a PoE switch then the device can be powered on without use the power adapter. Note: The IR-113E/IR-123E (PoE model) supports IEEE 802.3af PoE standard. It can be powered via the Ethernet cable when connected to a PoE switch. 1.6 Locate the SD card slot 1. It is recommended that you use a tool with a hexagonal socket, such as the socket spanner pictured below. Note: The hexagonal socket is an optional extra. 2 Attach the socket spanner to the PVC tube cap, and twist anti-clockwise to loosen the PVC tube. 9
9
Note: The bracket is an optional extra.
8.
Repower on the camera and refer to the following procedures to access
and configure it.
9.
If this IP Bullet camera is connected to a PoE switch then the device can
be powered on without use the power adapter.
Note: The IR-113E/IR-123E (PoE model) supports IEEE 802.3af PoE
standard. It can be powered via the Ethernet cable when connected to a
PoE switch.
1.6
Locate the SD card slot
1.
It is recommended that you use a tool with a hexagonal socket, such as
the socket spanner pictured below.
Note: The hexagonal socket is an optional extra.
2
Attach the socket spanner to the PVC tube cap, and twist
anti-clockwise to loosen the PVC tube.