Edimax PS-1206MFg User Manual - Page 129
Console Mode
View all Edimax PS-1206MFg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
13.2 Console Mode To configure the MFP Server for LPD printing, perform the procedures below: 1. Enable MFP Server's TCP/IP Support. 2. Set up MFP Server's IP address. 3. Verify MFP Server's IP Address. 4. Configure remote LPD printing on the host. 5. Print a test page. In the next sections, we will describe these five procedures step by step. 13.2.1 Enable MFP Server's TCP/IP Support The default configuration of the MFP Server is with TCP/IP support enabled. Anyway, you can configure the MFP Server to enable TCP/IP support using the configuration program. 13.2.2 Setup MFP Server's IP Address The MFP Server must have a unique IP address in order to be recognized by the network. You can set up the IP address on the various Unix/Linux systems using any one of the following methods: 1. DHCP (Dynamic Host Configuration Protocol) 2. BOOTP (Bootstrap Protocol) The MFP Server will use the last two methods to obtain its IP address automatically if its IP address is configured as Auto (0.0.0.0). 124