Edimax PS-1206MFg User Manual - Page 131
hostname, ip=MFP_Server_ip_address, MF010101, ha=0000B4010101, ip=203.66.191.12
![]() |
View all Edimax PS-1206MFg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
2. Add an entry to the host's /etc/bootptab file, similar to the following: hostname:\ :ht=1:\ :ha=MFP_Server_ethernet_address:\ :ip=MFP_Server_ip_address: Lines should be indented with tabs. Where hostname is the device name of a MFP Server, the ht=1 tag specifies the hardware type is Ethernet, the ha= tag specifies the Ethernet address of a MFP Server, which is the Node ID located on the MFP Server. The ha tag must be preceded by the ht tag. The ip= tag should correspond to the IP address you want to assign to the MFP Server. For example, a MFP Server with the following configuration: Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203.66.191.12 The entry for this MFP Server in the /etc/bootptab file should be: MF010101:\ :ht=1:\ :ha=0000B4010101:\ :ip=203.66.191.12: 126
![](/manual_guide/products/edimax-ps1206mfg-user-manual-fe227e2/131.png)