Edimax PS-1206P Manual - Page 119
Range, DNS, Subnet Mask and Gateway, and
View all Edimax PS-1206P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
You can enable/disable or set auto for the print server's DHCP server. The DHCP server is disabled by default. If the DHCP Server is enabled or set Auto, you have to assign a range of IP addresses here. Fill in the "Start IP", "Range", "DNS", "Subnet Mask" and "Gateway", and the print server will assign a unique IP for each client. Note that when "Auto" is selected, the DHCP Server of the print server will be enabled only when there is no other DHCP Server within the network. 8.4.4 SMB 109
109
You can enable/disable or set auto for the print server’s
DHCP server. The DHCP server is disabled by default. If
the DHCP Server is enabled or set Auto, you have to
assign a range of IP addresses here. Fill in the “Start IP”,
“Range”, “DNS”, “Subnet Mask” and “Gateway”, and the
print server will assign a unique IP for each client. Note
that when “Auto” is selected, the DHCP Server of the print
server will be enabled only when there is no other DHCP
Server within the network.
8.4.4
SMB