Edimax PS-1206P Manual - Page 22
Hardware Installation - compatibility
View all Edimax PS-1206P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Hardware Installation Unpack the print server package and verify that all the items listed in the section 1.2 are provided. Connect the print server to the printer you want to share on the network. Connect the print server to your network by attached the network cable to the UTP port of the print server. Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test (POST) after it is powered on. During the POST, the Status and Ready LEDs will be on. When the LEDs are unlighted, the print server is ready. NOTE1: MUST use the power adapter shipped with the print server, do NOT use any other power adapter from any sources. NOTE2: To prevent the compatibility problem between print server and a few printer, it is recommended that you power on the print server before the printer. 12